Mueller 5/8 x 3/4 Digital Encoder Water Meter, US Gallons With REMOTE Display

Description

Mueller Systems Water Meter - NEW
5/8" x 3/4" Positive Displacement
Composite Polymer Body
US Gallon SSR LCD Register with Encoded Output
With LCD Remote Register & 20' cable
Digital water meter with wired remote display. The LCD remote display allows reading the meter remotely from a place away from there meter when the meter isn't accessible such as inside tenant occupied apartments, under mobile homes or in crawl spaces or basements, in high hard to read spaces, behind fences or other remote read needs. Just tap the remote button and it will interrogate and display the actual current meter reading on the water meter. Great for submetering apartments, or commercial shopping or office complexes where the landlord doesn't have easy access to the meter itself. Can also be used to read underground pit set meters without opening or pumping out wet meter pits. Just mount the remote on a wall or post.
Brand New, never used!
Mueller Systems Series 420 Composite Meter
5/8" x 3/4" Size (5/8" chamber capacity with 3/4" AWWA Meter threads)
Engineered LEAD-FREE Polymer
Body Meets NSF-61, NSF/ANSI-372
Factory Test Results sticker attached
SSR (Solid State Register)  with Industry standard Encoder Output Register
US Gallon Registration
Register Displays 9 digits with two decimal points (to 9999999.99 gallons)
Encoder Output resolution is in 10s of gallons (6 digit billing resolution - last three digits dropped)
Output in AWWA UI-1203 encoded data (Sensus Protocol)
Plastic Register factory potted 5' wire output to 3 Conductor wire
Encoder output works most AMR/AMI industry standard encoder reading systems, and digital remotes
Reading Options:
Visual Read the odometer LCD output
Shining a bright flashlight in the optic sensor turns on the digital display to read
Rotating icon shows low flow (leak indicator)
Wire Encoded output to
INCLUDED
remote digital display
Alternately Wire Encoded output to AMR or AMI Device (radio transmitters)
Encoder register is NOT compatible with touch read pads.
3/4" AWWA Meter Threads - inlet and outlet
Uses 3/4" Meter Couplings - Not included - See out other listings if needed for new installations
3/4" Meter threads are approximately 1.25" O.D. with internal bore of 3/4"
Meter Specs (USA Standards):
Meets AWWA C-710 Specifications
Lay Length 7-1/2"
Meter Threads - AWWA Spec 1" (approx 1-1/4" O.D.) (meter couplings. meter valves, or meter setter required for new installations)
Meter Threads are metal
LEAD FREE - Meets all NSF-61g NSF-372 Lead-free requirements of the Safe Drinking Water Act as revised in 2014 (SDWA)
Normal Operating Range - 1/2 to 20 GPM (100% +/- 1.5% accuracy)
Max Continuous Flow - 15 GPM
Low Flow Accuracy - 1/8 GPM (95%+)
Maximum working pressure 150 psi
Working temperature range 33f to 100f
VL9 Remote Display Register INCLUDED
Remote Register mounts on wall or post
3 conductor connection to meter encoder register
Will display to the output resolution of the register (10s of gallons)
Tap the sonic switch to interrogate meter for current read which displays for about 10 seconds
Displays Meter reading and meter encoder serial number.
Meter includes 5' cable, Remote includes 20' cable.
See our other listings for longer 3 conductor cable if needed
15' cable - Search ebay listing number 302274528558
25' cable - Search ebay
listing
number 293165793717
50' cable - Search ebay listing number 292077618093
OPTIONS/Add-ons Available separately in our eBay store:
Meter Couplings and gaskets available in other listings