Difalco 1/32 Slot Car controller, DD300

Description

ATTENTION!!! ALL DIFALCO CONTROLLERS SOLD WILL NOW FEATURE OUR OWN CUSTOM HANDLE  DESIGN.
HANDLES WILL FEEL LIKE A TRADITIONAL PARMA HANDLE WITH AN UPDATED LOOK.
See last 2 pictures.
Choose your handle color. Just add a note to your order or I can choose the color for you.
Midnight black, Cobalt blue, Gray metallic, silver metallic and clear handles are available.
1/32 CONTROLLERS
TECHNICAL HIGHLIGHTS
Computer designed and labeled circuit board. Wiper bands are nickel plated for durability.
Exclusive routed fiberglass frame is separate from the circuit board electronics. This allows for inexpensive upgrades in the future by simply replacing the circuit board.
Adjustable braking and sensitivity rheostats provide a wide adjustment range to match your car, track and driver characteristics for optimal racing performance.
"E"lectronic auto reset brake and power fuses with reverse diode protection for reliability.
High amp transistor design is virtually maintenance free.
Acu-Pivot trigger pin with trigger ball bearings are standard! Ball bearings keep the wiper button firmly in contact with the wiper bands with zero trigger side play even after years of racing.
Rounded wiper button for pinpoint selection of the correct wiper band and reduced friction.
All our designs can be serviced, repaired or upgraded by any racer. No returning to the factory, like other controllers! This is important if you want to avoid other manufacturers costly repair bills or if you are in another country.
Parma style handles are standard on all Difalco controllers. They are more comfortable to hold than that square handle brand! Do not be fooled by off brand handles that are flimsy and will flex in your hand and crack in a couple years!
Neo 1/32 controllers come standard with dual polarity.
GENESIS NEO CONTROLLERS
DD300: Neo controller.
17 band design for more precise control than comparably priced controllers.
Difalco Neo controllers blow all similarly priced controllers out of the water! Packed with features only found on more expensive controllers. Neo controllers feature dual polarity as standard and will work on 2 or 3 wire hookup tracks. Extra long 14 ga wires with clear insulation for outstanding power and looks. Our ball bearing trigger provides silky smooth trigger action. Wide range sensitivity and brake rheostats.
8.00
FEATURES TO THINK ABOUT BEFORE YOU BUY ANOTHER CONTROLLER
POWER:
*No inline fuses! We do not put a fuse on our main power lines. Not only does this add resistance to the power circuit it also means you are depending on a cheap fuse block to maintain contact with the fuse. If your ATC mini inline fuse blows your race will be over while you leave the track to replace it.
We fuse our transistor outputs and brake line with electronic auto reset fuses that start working as soon as the short circuit is corrected.
*Our controller uses a simple terminal setup to switch between positive and negative polarity. Make sure you have this feature.
MECHANICAL:
*We use a ball bearing trigger with our special threaded trigger pin and adjustable locknut.
They
claim that their "specially designed pivot rivet provides a snug fit...eliminating the need for aftermarket bearings".
I say bull.
They
use a standard Parma trigger pin. It not only has plenty of side play but as the controller is used the nylon trigger hole will enlarge and the bearings will wear. Our ball bearings are shimmed so there is zero side play. Our adjustable nut means when the nylon trigger eventually compresses a slight turn will eliminate all side play in our controller.
*We use a rounded wiper button with a very small contract area on the bands. This reduces friction and means that the wiper button is only in contact with a couple bands at any one time.
They
say they have a "flexible wiper arm", but they also use a flat wiper button. We learned a long time ago that it is impossible to keep a flat wiper button in perfect contact with flat wiper bands. The second you put any side pressure on the trigger you lift up the top, bottom, front or back of the wiper button. So instead of contacting the band on the front edge of the button you are now contacting the band in the middle of the wiper button. Now you just put the wrong amount of power to your car.
CUSTOMER SUPPORT:
All our designs can be serviced, repaired or upgraded by any racer. No returning to the factory, like other controllers! This is important if you want to avoid other manufacturers costly repair bills or if you are in another country.
Ease of maintenance:
Your Difalco controller will give you years of trouble free service with a minimum of maintenance. Clearly written instructions are included for every feature. The open frame design makes routine cleaning quick and easy.
Service and support:
Complete troubleshooting instructions are included so in the unlikely event a problem should occur racers can quickly diagnose and fix most problems with readily available, inexpensive repair parts. If you ever need assistance, Jim at Difalco Design will be there with his 45 years of slot racing knowledge for advice or to service your controller.
NOT SURE WHICH CONTROLLER YOU NEED? CONTACT JIM at DIFALCO DESIGN FOR ADVICE!
Tell me the fastest and slowest type of car you race, if you race on positive and/or negative tracks and any specific features you want so we can recommend a few options in different price ranges.